Basics of Lightning Protection Systems

Lightning related accidents occur around 240,000 times a year, and is the main cause of around 6,00 deaths. Although not too big numbers to be honest, the unpredictability and additional damages caused by these accidents are enough reasons for you to start taking protective measures against it. One of the first steps that you can take is utilizing a lightning protection system, specifically design to protect your homes or business from these strikes.

This article written by central electrindo tangerang aims to give you a brief idea of what the components of an effective lightning protection system is. Although one might expect that the only thing that’s important is the lightning rod, there are actually other parts needed in order to make sure that your system is working as expected.

1) The Lightning Rod penangkal petir or Air Terminals’ – acts as the main conducive point of the whole system, where the lightning “enters”. They are usually seen at the highest point of your home or building, and is the one that’s expected to capture the lightning.

2) Cables – these are usually heavy cables which help drive the lightning from the rod towards the ground. Heavy duty cables should be used since they will be carrying the whole load of energy created by the lightning strike.

3) Ground Rods – Thick and long metallic rods buried deep underground, and is currently within a protective structure. The cables will connect to these rods to ensure a safe discharge of lightning around the structure.

As mentioned earlier, the idea that the lightning rod is the most important part of the structure is incorrect. It is actually good cable coverage, as well as good ground rod placement that defines an effective protection system. Oftentimes, cable management and ground rod location are taken for granted, which causes the whole system to break down, and not work as efficient and effective as possible.

Now that you have an idea on what the basic components of an effective system is, we will now discuss the steps you can follow to ensure efficiency with your system:

1) The rods or air terminal glitter and spice Singapore setup should be distributed evenly around the roof, preferable around the edges, and not just in the center (contrary to popular belief). These rods are designed to intercept the lightning strike from hitting anything in your current building or household. Some other things to consider is that these rods should be placed in an area that is clear enough so that there are no obstacles when the lightning does hit it.

2) The conductors (toko safety terdekat cables) that you have should be distributed evenly around your structure as well. Side jumps or flashes occur when the amount of energy travelling through a conductor is too much that it is dispersed even before it reaches the ground. With this in mind, it is highly suggested that you try and create multiple conductor paths around your house or building. All the while, you should keep in mind that the cables should be allowing direct and quick transfer between your air terminal and ground terminals.

3) Lastly, your ground rods, or ground elimination terminal, should be able to dissipate the lightning quickly, once it reaches that area. One important thing to consider with your ground rods is that you should limit potential hazards and interference, between your conductor and ground terminal. If there are items obstructing the path, this may cause issues which greatly affects the impact of your lightning protection system.

These are just some of the tips you may follow when starting your own lightning protection system designed by pt suri nusantara jaya kranggan. There are several guidelines or handbooks which you can refer to when trying to understand lightning systems better, but hopefully the one we’ve presented to you can be a good stepping stone in your journey to a safe living condition.

Leave a Reply